Start review
Automated design compliance

Check road design reports against published standards

Upload a PDF. Get findings with clause references, submitted and required values, and source page citations. Review each finding and generate your report.

Start review Book a demo
app.tarainfra.dev/dashboard
Reports
7
Findings
143
Pending
2
app.tarainfra.dev/reports/r-4821
Final Design Report
Standard tier · 87 pages · 6 domains
12 of 21
Non-compliant
Minimum radius exceeded at km 14+200
Submitted
R = 180 m
Required
R = 250 m min
MoWT Table 4.3.1
Accept Edit Dismiss
Warning
Crest curve K-value below desirable minimum
ERA Table 7.15
Compliant
Subbase thickness meets requirement
MoWT Catalogue
Standards compliance

Every finding references a specific clause

TARA checks designs against MoWT 2010, ERA 2013, AASHTO, and other published standards. Each finding shows the submitted value, required value, and the exact clause reference — no black-box results.

See how it works
app.tarainfra.dev/reports/r-4821
Page 34
All 21 Non-compliant 5 Warnings 7
Non-compliant
Minimum radius exceeded at km 14+200
Submitted
R = 180 m
Required
R = 250 m min
MoWT Table 4.3.1
Warning
Crest curve K-value below desirable
Submitted
K = 28
Required
K = 35
ERA Table 7.15
Compliant
Subbase thickness meets requirement
MoWT Catalogue
Engineer review

Accept, edit, or reject each finding

TARA provides the first-pass review. The engineer always decides. Accept findings as-is, edit with your own notes, or reject findings that don't apply. Only confirmed findings make it into the final report.

Learn more
app.tarainfra.dev/reports/r-4821
Non-compliant
Minimum radius exceeded at km 14+200
Horizontal Alignment · Confidence: High
Submitted
R = 180 m
Required
R = 250 m min
MoWT Table 4.3.1 — Design Class DC3
Accept finding Edit finding Reject finding
Warning
Crest curve K-value below desirable minimum
Accepted
Non-compliant
Side drain capacity insufficient
Rejected — redesigned in addendum
Report generation

Generate a Word report from confirmed findings

Once you've reviewed all findings, generate a structured compliance report. Only accepted and edited findings are included, grouped by engineering domain with full clause references.

View sample report
Kampala-Jinja_Compliance_Review.docx
12 findings · 6 domains · Generated 13 Apr 2026

How it works

Three steps from PDF upload to compliance report.

1

Upload your report

Upload a road design PDF — feasibility study, final design report, traffic study, or geotechnical report.

2

TARA checks against published standards

Parameters are extracted, checked against published design standards, and findings generated with clause references.

3

Review findings, generate report

Accept, edit, or reject each finding. Download a Word report with your confirmed compliance review.

11
Engineering domains
6
Design standards
$20
From, per report
<5 min
Review turnaround

Pricing

From $20 per report. No subscriptions.

Routine
$20 per report
Single-domain check for shorter documents
  • Up to 30 pages
  • Single domain review
  • Clause references
  • Word report download
Start review
Most popular
Standard
$50 per report
Multi-domain review for full design reports
  • Up to 100 pages
  • Multi-domain review
  • Clause references
  • Word report download
Start review
Comprehensive
$85 per report
All domains with cross-domain consistency checks
  • Unlimited pages
  • All domains reviewed
  • Cross-domain consistency checks
  • Word report download
Start review

Submit with confidence

Better compliance reviews. Faster turnaround. Every finding traceable to a published standard.

Start review